10 nm to ft — 10 nanometres in feet

10nm3.2808e-8ft

Exact 10 ÷ 304,800,000 = 3.2808e-8

10 nanometres in other units

Micrometres0.01µm
Millimetres0.00001mm
Centimetres0.000001cm
Metres1e-8m
Kilometres1e-11km
Inches3.937e-7in
Feet3.2808e-8ft
Yards1.0936e-8yd
Miles6.2137e-12mi
Nautical miles5.3996e-12nmi

nm to ft at a glance

NanometresFeet
1 nm3.2808e-9 ft
2 nm6.5617e-9 ft
3 nm9.8425e-9 ft
5 nm1.6404e-8 ft
10 nm3.2808e-8 ft
20 nm6.5617e-8 ft
25 nm8.2021e-8 ft
50 nm1.6404e-7 ft
100 nm3.2808e-7 ft
250 nm8.2021e-7 ft
500 nm0.00000164042 ft
1,000 nm0.00000328084 ft

How to convert nanometres to feet

Multiply by 3.2808e-9 — one nanometre is 3.2808e-9 feet. That factor is exact: it comes from the definition of the units rather than from a measurement, so it will not change and does not need rounding.

Working 10 ÷ 304,800,000 = 3.2808e-8

What these units are

The nanometre and the foot are covered in the length unit guide, along with every other unit on this page.

Questions

How many feet are in a nanometre?

One nanometre is 3.2808e-9 feet. This figure is exact — it comes from the definition of the unit, not a measurement.

What is 10 nanometres in feet?

10 nanometres is 3.2808e-8 feet. The working is 10 ÷ 304,800,000 = 3.2808e-8.

Is an inch exactly 2.54 centimetres?

Yes, exactly. Since 1959 the international inch has been defined as 25.4 millimetres, so the figure is a definition rather than a measurement. Every foot, yard and mile figure on this page follows from it and is equally exact.

Why is a nautical mile different from a mile?

It is tied to the Earth rather than to a body part. One nautical mile is one minute of latitude, fixed at exactly 1,852 metres, which makes chart work straightforward for anyone navigating by degrees.

How do I write my height in metric?

Convert the whole thing to inches first, then multiply by 2.54. Five foot ten is 70 inches, which is 177.8 cm. Converting the feet and the inches separately is where the arithmetic usually goes wrong.

Meter or metre?

Both name the same unit. "Metre" is the international spelling used by the SI and most English-speaking countries; "meter" is standard in the United States. Either spelling will find this page.

Other length conversions

More conversions