30 m to ft — 30 metres in feet

30m98.425197ft

Exact 30 × 3.28084 = 98.425197

30 metres in other units

Nanometres30,000,000,000nm
Micrometres30,000,000µm
Millimetres30,000mm
Centimetres3,000cm
Kilometres0.03km
Inches1,181.1in
Feet98.425197ft
Yards32.808399yd
Miles0.01864114mi
Nautical miles0.0161987nmi

m to ft at a glance

MetresFeet
1 m3.28084 ft
2 m6.56168 ft
3 m9.84252 ft
5 m16.404199 ft
10 m32.808399 ft
20 m65.616798 ft
25 m82.020997 ft
50 m164.041995 ft
100 m328.08399 ft
250 m820.209974 ft
500 m1,640.42 ft
1,000 m3,280.84 ft

How to convert metres to feet

Multiply by 3.28084 — one metre is 3.28084 feet. That factor is exact: it comes from the definition of the units rather than from a measurement, so it will not change and does not need rounding.

Working 30 × 3.28084 = 98.425197

In words: about ninety-eight feet.

What these units are

The metre and the foot are covered in the length unit guide, along with every other unit on this page.

Questions

How many feet are in a metre?

One metre is 3.28084 feet. This figure is exact — it comes from the definition of the unit, not a measurement.

What is 30 metres in feet?

30 metres is 98.425197 feet. The working is 30 × 3.28084 = 98.425197.

Is an inch exactly 2.54 centimetres?

Yes, exactly. Since 1959 the international inch has been defined as 25.4 millimetres, so the figure is a definition rather than a measurement. Every foot, yard and mile figure on this page follows from it and is equally exact.

Why is a nautical mile different from a mile?

It is tied to the Earth rather than to a body part. One nautical mile is one minute of latitude, fixed at exactly 1,852 metres, which makes chart work straightforward for anyone navigating by degrees.

How do I write my height in metric?

Convert the whole thing to inches first, then multiply by 2.54. Five foot ten is 70 inches, which is 177.8 cm. Converting the feet and the inches separately is where the arithmetic usually goes wrong.

Meter or metre?

Both name the same unit. "Metre" is the international spelling used by the SI and most English-speaking countries; "meter" is standard in the United States. Either spelling will find this page.

Other length conversions

More conversions