10 psi to MPa — 10 pounds per square inch in megapascals
Exact 10 ÷ 145.037738 = 0.06894757
10 pounds per square inch in other units
| Pascals | 68,947.57 | Pa |
|---|---|---|
| Hectopascals | 689.475729 | hPa |
| Kilopascals | 68.947573 | kPa |
| Megapascals | 0.06894757 | MPa |
| Millibars | 689.475729 | mbar |
| Bar | 0.68947573 | bar |
| Standard atmospheres | 0.68045964 | atm |
| Torr | 517.149326 | Torr |
| Millimetres of mercury | 517.149252 | mmHg |
| Inches of mercury | 20.360207 | inHg |
psi to MPa at a glance
| Pounds per square inch | Megapascals |
|---|---|
| 1 psi | 0.006894757293 MPa |
| 2 psi | 0.01378951 MPa |
| 3 psi | 0.02068427 MPa |
| 5 psi | 0.03447379 MPa |
| 10 psi | 0.06894757 MPa |
| 20 psi | 0.13789515 MPa |
| 25 psi | 0.17236893 MPa |
| 50 psi | 0.34473786 MPa |
| 100 psi | 0.68947573 MPa |
| 250 psi | 1.723689 MPa |
| 500 psi | 3.447379 MPa |
| 1,000 psi | 6.894757 MPa |
How to convert pounds per square inch to megapascals
Multiply by 0.006894757293 — one pound per square inch is 0.006894757293 megapascals. That factor is exact: it comes from the definition of the units rather than from a measurement, so it will not change and does not need rounding.
Working 10 ÷ 145.037738 = 0.06894757
What these units are
The pound per square inch and the megapascal are covered in the pressure unit guide, along with every other unit on this page.
Questions
How many megapascals are in a pound per square inch?
One pound per square inch is 0.006894757293 megapascals. This figure is exact — it comes from the definition of the unit, not a measurement.
What is 10 pounds per square inch in megapascals?
10 pounds per square inch is 0.06894757 megapascals. The working is 10 ÷ 145.037738 = 0.06894757.
What pressure should my tyres be?
Look at the sticker in the driver's door frame or the fuel flap, not the number moulded into the tyre — that one is the tyre's maximum, not the manufacturer's recommendation. Most cars sit somewhere around 32 to 35 psi, which is roughly 2.2 to 2.4 bar.
Is my tyre gauge measuring absolute or gauge pressure?
Gauge pressure — the amount above the surrounding air. A tyre reading 32 psi actually contains about 46.7 psi absolute, because atmospheric pressure of roughly 14.7 psi is already pressing on the other side of the gauge. Conversions on this page are between units, and leave that distinction alone.
Why do weather forecasts use hectopascals and millibars interchangeably?
Because they are the same size. One hectopascal is exactly one millibar, so the change from mbar to hPa was a relabelling rather than a conversion. Standard sea-level pressure is 1013.25 of either.
What is the difference between torr and mmHg?
Almost nothing, and the difference is deliberate. A torr is exactly one seven-hundred-and-sixtieth of a standard atmosphere; the conventional mmHg is defined as exactly 133.322387415 pascals. They diverge by about one part in seven million — invisible in medicine, occasionally not in vacuum work.