100 bar to kPa — 100 bar in kilopascals
Exact 100 × 100 = 10,000
100 bar in other units
| Pascals | 10,000,000 | Pa |
|---|---|---|
| Hectopascals | 100,000 | hPa |
| Kilopascals | 10,000 | kPa |
| Megapascals | 10 | MPa |
| Millibars | 100,000 | mbar |
| Standard atmospheres | 98.692327 | atm |
| Pounds per square inch | 1,450.38 | psi |
| Torr | 75,006.17 | Torr |
| Millimetres of mercury | 75,006.16 | mmHg |
| Inches of mercury | 2,953 | inHg |
bar to kPa at a glance
| Bar | Kilopascals |
|---|---|
| 1 bar | 100 kPa |
| 2 bar | 200 kPa |
| 3 bar | 300 kPa |
| 5 bar | 500 kPa |
| 10 bar | 1,000 kPa |
| 20 bar | 2,000 kPa |
| 25 bar | 2,500 kPa |
| 50 bar | 5,000 kPa |
| 100 bar | 10,000 kPa |
| 250 bar | 25,000 kPa |
| 500 bar | 50,000 kPa |
| 1,000 bar | 100,000 kPa |
How to convert bar to kilopascals
Multiply by 100 — one bar is 100 kilopascals. That factor is exact: it comes from the definition of the units rather than from a measurement, so it will not change and does not need rounding.
Working 100 × 100 = 10,000
In words: ten thousand kilopascals.
What these units are
The bar and the kilopascal are covered in the pressure unit guide, along with every other unit on this page.
Questions
How many kilopascals are in a bar?
One bar is 100 kilopascals. This figure is exact — it comes from the definition of the unit, not a measurement.
What is 100 bar in kilopascals?
100 bar is 10,000 kilopascals. The working is 100 × 100 = 10,000.
What pressure should my tyres be?
Look at the sticker in the driver's door frame or the fuel flap, not the number moulded into the tyre — that one is the tyre's maximum, not the manufacturer's recommendation. Most cars sit somewhere around 32 to 35 psi, which is roughly 2.2 to 2.4 bar.
Is my tyre gauge measuring absolute or gauge pressure?
Gauge pressure — the amount above the surrounding air. A tyre reading 32 psi actually contains about 46.7 psi absolute, because atmospheric pressure of roughly 14.7 psi is already pressing on the other side of the gauge. Conversions on this page are between units, and leave that distinction alone.
Why do weather forecasts use hectopascals and millibars interchangeably?
Because they are the same size. One hectopascal is exactly one millibar, so the change from mbar to hPa was a relabelling rather than a conversion. Standard sea-level pressure is 1013.25 of either.
What is the difference between torr and mmHg?
Almost nothing, and the difference is deliberate. A torr is exactly one seven-hundred-and-sixtieth of a standard atmosphere; the conventional mmHg is defined as exactly 133.322387415 pascals. They diverge by about one part in seven million — invisible in medicine, occasionally not in vacuum work.