2 Torr to kPa — 2 torr in kilopascals
Exact 2 ÷ 7.500617 = 0.26664474
2 torr in other units
| Pascals | 266.644737 | Pa |
|---|---|---|
| Hectopascals | 2.666447 | hPa |
| Kilopascals | 0.26664474 | kPa |
| Megapascals | 0.000266644737 | MPa |
| Millibars | 2.666447 | mbar |
| Bar | 0.002666447368 | bar |
| Standard atmospheres | 0.002631578947 | atm |
| Pounds per square inch | 0.03867355 | psi |
| Millimetres of mercury | 2 | mmHg |
| Inches of mercury | 0.07874015 | inHg |
Torr to kPa at a glance
| Torr | Kilopascals |
|---|---|
| 1 Torr | 0.13332237 kPa |
| 2 Torr | 0.26664474 kPa |
| 3 Torr | 0.39996711 kPa |
| 5 Torr | 0.66661184 kPa |
| 10 Torr | 1.333224 kPa |
| 20 Torr | 2.666447 kPa |
| 25 Torr | 3.333059 kPa |
| 50 Torr | 6.666118 kPa |
| 100 Torr | 13.332237 kPa |
| 250 Torr | 33.330592 kPa |
| 500 Torr | 66.661184 kPa |
| 1,000 Torr | 133.322368 kPa |
How to convert torr to kilopascals
Multiply by 0.13332237 — one torr is 0.13332237 kilopascals. That factor is exact: it comes from the definition of the units rather than from a measurement, so it will not change and does not need rounding.
Working 2 ÷ 7.500617 = 0.26664474
What these units are
The torr and the kilopascal are covered in the pressure unit guide, along with every other unit on this page.
Questions
How many kilopascals are in a torr?
One torr is 0.13332237 kilopascals. This figure is exact — it comes from the definition of the unit, not a measurement.
What is 2 torr in kilopascals?
2 torr is 0.26664474 kilopascals. The working is 2 ÷ 7.500617 = 0.26664474.
What pressure should my tyres be?
Look at the sticker in the driver's door frame or the fuel flap, not the number moulded into the tyre — that one is the tyre's maximum, not the manufacturer's recommendation. Most cars sit somewhere around 32 to 35 psi, which is roughly 2.2 to 2.4 bar.
Is my tyre gauge measuring absolute or gauge pressure?
Gauge pressure — the amount above the surrounding air. A tyre reading 32 psi actually contains about 46.7 psi absolute, because atmospheric pressure of roughly 14.7 psi is already pressing on the other side of the gauge. Conversions on this page are between units, and leave that distinction alone.
Why do weather forecasts use hectopascals and millibars interchangeably?
Because they are the same size. One hectopascal is exactly one millibar, so the change from mbar to hPa was a relabelling rather than a conversion. Standard sea-level pressure is 1013.25 of either.
What is the difference between torr and mmHg?
Almost nothing, and the difference is deliberate. A torr is exactly one seven-hundred-and-sixtieth of a standard atmosphere; the conventional mmHg is defined as exactly 133.322387415 pascals. They diverge by about one part in seven million — invisible in medicine, occasionally not in vacuum work.