500 MPa to kPa — 500 megapascals in kilopascals
Exact 500 × 1,000 = 500,000
500 megapascals in other units
| Pascals | 500,000,000 | Pa |
|---|---|---|
| Hectopascals | 5,000,000 | hPa |
| Kilopascals | 500,000 | kPa |
| Millibars | 5,000,000 | mbar |
| Bar | 5,000 | bar |
| Standard atmospheres | 4,934.62 | atm |
| Pounds per square inch | 72,518.87 | psi |
| Torr | 3,750,308.41 | Torr |
| Millimetres of mercury | 3,750,307.88 | mmHg |
| Inches of mercury | 147,649.92 | inHg |
MPa to kPa at a glance
| Megapascals | Kilopascals |
|---|---|
| 1 MPa | 1,000 kPa |
| 2 MPa | 2,000 kPa |
| 3 MPa | 3,000 kPa |
| 5 MPa | 5,000 kPa |
| 10 MPa | 10,000 kPa |
| 20 MPa | 20,000 kPa |
| 25 MPa | 25,000 kPa |
| 50 MPa | 50,000 kPa |
| 100 MPa | 100,000 kPa |
| 250 MPa | 250,000 kPa |
| 500 MPa | 500,000 kPa |
| 1,000 MPa | 1,000,000 kPa |
How to convert megapascals to kilopascals
Multiply by 1,000 — one megapascal is 1,000 kilopascals. That factor is exact: it comes from the definition of the units rather than from a measurement, so it will not change and does not need rounding.
Working 500 × 1,000 = 500,000
In words: five hundred thousand kilopascals.
Questions
How many kilopascals are in a megapascal?
One megapascal is 1,000 kilopascals. This figure is exact — it comes from the definition of the unit, not a measurement.
What is 500 megapascals in kilopascals?
500 megapascals is 500,000 kilopascals. The working is 500 × 1,000 = 500,000.
What pressure should my tyres be?
Look at the sticker in the driver's door frame or the fuel flap, not the number moulded into the tyre — that one is the tyre's maximum, not the manufacturer's recommendation. Most cars sit somewhere around 32 to 35 psi, which is roughly 2.2 to 2.4 bar.
Is my tyre gauge measuring absolute or gauge pressure?
Gauge pressure — the amount above the surrounding air. A tyre reading 32 psi actually contains about 46.7 psi absolute, because atmospheric pressure of roughly 14.7 psi is already pressing on the other side of the gauge. Conversions on this page are between units, and leave that distinction alone.
Why do weather forecasts use hectopascals and millibars interchangeably?
Because they are the same size. One hectopascal is exactly one millibar, so the change from mbar to hPa was a relabelling rather than a conversion. Standard sea-level pressure is 1013.25 of either.
What is the difference between torr and mmHg?
Almost nothing, and the difference is deliberate. A torr is exactly one seven-hundred-and-sixtieth of a standard atmosphere; the conventional mmHg is defined as exactly 133.322387415 pascals. They diverge by about one part in seven million — invisible in medicine, occasionally not in vacuum work.